Close-To-Edge Clinch Studs
Close-to-edge clinch studs can be installed closer to the edge of the panel than standard clinch studs without causing edge distortion. They are flush on the reverse side when installed using a press with a squeezing action and fit into the same hole size as standard clinch studs.
TYPES: C-FHL = Hardened Steel Zinc Plated, C-FHLS = Stainless Steel
STANDARD LENGTH SIZES: 6, 8, 10, 12, 15, 18, 20mm
| CLINCH STUDS - CLOSE TO EDGE, TYPE C-FHL / C-FHLS | ||||
|---|---|---|---|---|
| Thread Size | Hole Diameter | Minimum Sheet Thickness | Min. distance centre to edge | Length Range Available |
| M2.5 | 2.5 | 1.0 | 2.8 | 6mm to 15mm |
| M3 | 3.0 | 1.0 | 3.3 | 6mm to 20mm |
| M4 | 4.0 | 1.0 | 4.3 | 6mm to 20mm |
| M5 | 5.0 | 1.0 | 5.6 | 10mm to 20mm |
Dimensions in mm. Unit of sale = 100pcs.
STANDARD LENGTH SIZES: 6, 8, 10, 12, 15, 18, 20mm